borgmatic

How to monitor your backups

Monitoring and alerting

Having backups is great, but they won't do you a lot of good unless you have confidence that they're running on a regular basis. That's where monitoring and alerting comes in.

There are several different ways you can monitor your backups and find out whether they're succeeding. Which of these you choose to do is up to you and your particular infrastructure.

Job runner alerts

The easiest place to start is with failure alerts from the scheduled job runner (cron, systemd, etc.) that's running borgmatic. But note that if the job doesn't even get scheduled (e.g. due to the job runner not running), you probably won't get an alert at all! Still, this is a decent first line of defense, especially when combined with some of the other approaches below.

Commands run on error

The on_error hook allows you to run an arbitrary command or script when borgmatic itself encounters an error running your backups. So for instance, you can run a script to send yourself a text message alert. But note that if borgmatic doesn't actually run, this alert won't fire. See error hooks below for how to configure this.

Third-party monitoring services

borgmatic integrates with these monitoring services and libraries, pinging them as backups happen:

The idea is that you'll receive an alert when something goes wrong or when the service doesn't hear from borgmatic for a configured interval (if supported). See the documentation links above for configuration information.

While these services and libraries offer different features, you probably only need to use one of them at most.

Third-party monitoring software

You can use traditional monitoring software to consume borgmatic JSON output and track when the last successful backup occurred. See scripting borgmatic below for how to configure this.

Borg hosting providers

Most Borg hosting providers include monitoring and alerting as part of their offering. This gives you a dashboard to check on all of your backups, and can alert you if the service doesn't hear from borgmatic for a configured interval.

Consistency checks

While not strictly part of monitoring, if you want confidence that your backups are not only running but are restorable as well, you can configure particular consistency checks or even script full extract tests.

Error hooks

When an error occurs during a create, prune, compact, or check action, borgmatic can run configurable shell commands to fire off custom error notifications or take other actions, so you can get alerted as soon as something goes wrong. Here's a not-so-useful example:

on_error:
    - echo "Error while creating a backup or running a backup hook."

Prior to version 1.8.0 Put this option in the hooks: section of your configuration.

The on_error hook supports interpolating particular runtime variables into the hook command. Here's an example that assumes you provide a separate shell script to handle the alerting:

on_error:
    - send-text-message.sh {configuration_filename} {repository}

In this example, when the error occurs, borgmatic interpolates runtime values into the hook command: the borgmatic configuration filename and the path of the repository. Here's the full set of supported variables you can use here:

Note that borgmatic runs the on_error hooks only for create, prune, compact, or check actions/hooks in which an error occurs and not other actions. borgmatic does not run on_error hooks if an error occurs within a before_everything or after_everything hook. For more about hooks, see the borgmatic hooks documentation, especially the security information.

New in version 1.8.7 borgmatic automatically escapes these interpolated values to prevent shell injection attacks. One implication of this change is that you shouldn't wrap the interpolated values in your own quotes, as that will interfere with the quoting performed by borgmatic and result in your command receiving incorrect arguments. For instance, this won't work:

on_error:
    # Don't do this! It won't work, as the {error} value is already quoted.
    - send-text-message.sh "Uh oh: {error}"

Do this instead:

on_error:
    - send-text-message.sh {error}

Healthchecks hook

Healthchecks is a service that provides "instant alerts when your cron jobs fail silently," and borgmatic has built-in integration with it. Once you create a Healthchecks account and project on their site, all you need to do is configure borgmatic with the unique "Ping URL" for your project. Here's an example:

healthchecks:
    ping_url: https://hc-ping.com/addffa72-da17-40ae-be9c-ff591afb942a

Prior to version 1.8.0 Put this option in the hooks: section of your configuration.

With this configuration, borgmatic pings your Healthchecks project when a backup begins, ends, or errors, but only when any of the create, prune, compact, or check actions are run.

Then, if the actions complete successfully, borgmatic notifies Healthchecks of the success and includes borgmatic logs in the payload data sent to Healthchecks. This means that borgmatic logs show up in the Healthchecks UI, although be aware that Healthchecks currently has a 100-kilobyte limit for the logs in each ping.

If an error occurs during any action or hook, borgmatic notifies Healthchecks, also tacking on logs including the error itself. But the logs are only included for errors that occur when a create, prune, compact, or check action is run.

You can customize the verbosity of the logs that are sent to Healthchecks with borgmatic's --monitoring-verbosity flag. The --list and --stats flags may also be of use. See borgmatic create --help for more information. Additionally, see the borgmatic configuration file for additional Healthchecks options.

You can configure Healthchecks to notify you by a variety of mechanisms when backups fail or it doesn't hear from borgmatic for a certain period of time.

Cronitor hook

Cronitor provides "Cron monitoring and uptime healthchecks for websites, services and APIs," and borgmatic has built-in integration with it. Once you create a Cronitor account and cron job monitor on their site, all you need to do is configure borgmatic with the unique "Ping API URL" for your monitor. Here's an example:

cronitor:
    ping_url: https://cronitor.link/d3x0c1

Prior to version 1.8.0 Put this option in the hooks: section of your configuration.

With this configuration, borgmatic pings your Cronitor monitor when a backup begins, ends, or errors, but only when any of the prune, compact, create, or check actions are run. Then, if the actions complete successfully or errors, borgmatic notifies Cronitor accordingly.

You can configure Cronitor to notify you by a variety of mechanisms when backups fail or it doesn't hear from borgmatic for a certain period of time.

Cronhub hook

Cronhub provides "instant alerts when any of your background jobs fail silently or run longer than expected," and borgmatic has built-in integration with it. Once you create a Cronhub account and monitor on their site, all you need to do is configure borgmatic with the unique "Ping URL" for your monitor. Here's an example:

cronhub:
    ping_url: https://cronhub.io/start/1f5e3410-254c-11e8-b61d-55875966d031

Prior to version 1.8.0 Put this option in the hooks: section of your configuration.

With this configuration, borgmatic pings your Cronhub monitor when a backup begins, ends, or errors, but only when any of the prune, compact, create, or check actions are run. Then, if the actions complete successfully or errors, borgmatic notifies Cronhub accordingly.

Note that even though you configure borgmatic with the "start" variant of the ping URL, borgmatic substitutes the correct state into the URL when pinging Cronhub ("start", "finish", or "fail").

You can configure Cronhub to notify you by a variety of mechanisms when backups fail or it doesn't hear from borgmatic for a certain period of time.

PagerDuty hook

In case you're new here: borgmatic is simple, configuration-driven backup software for servers and workstations, powered by Borg Backup.

PagerDuty provides incident monitoring and alerting. borgmatic has built-in integration that can notify you via PagerDuty as soon as a backup fails, so you can make sure your backups keep working.

First, create a PagerDuty account and service on their site. On the service, add an integration and set the Integration Type to "borgmatic".

Then, configure borgmatic with the unique "Integration Key" for your service. Here's an example:

pagerduty:
    integration_key: a177cad45bd374409f78906a810a3074

Prior to version 1.8.0 Put this option in the hooks: section of your configuration.

With this configuration, borgmatic creates a PagerDuty event for your service whenever backups fail, but only when any of the create, prune, compact, or check actions are run. Note that borgmatic does not contact PagerDuty when a backup starts or when it ends without error.

You can configure PagerDuty to notify you by a variety of mechanisms when backups fail.

If you have any issues with the integration, please contact us.

ntfy hook

New in version 1.6.3 ntfy is a free, simple, service (either hosted or self-hosted) which offers simple pub/sub push notifications to multiple platforms including web, Android and iOS.

Since push notifications for regular events might soon become quite annoying, this hook only fires on any errors by default in order to instantly alert you to issues. The states list can override this. Each state can have its own custom messages, priorities and tags or, if none are provided, will use the default.

An example configuration is shown here with all the available options, including priorities and tags:

ntfy:
    topic: my-unique-topic
    server: https://ntfy.my-domain.com
    username: myuser
    password: secret

    start:
        title: A borgmatic backup started
        message: Watch this space...
        tags: borgmatic
        priority: min
    finish:
        title: A borgmatic backup completed successfully
        message: Nice!
        tags: borgmatic,+1
        priority: min
    fail:
        title: A borgmatic backup failed
        message: You should probably fix it
        tags: borgmatic,-1,skull
        priority: max
    states:
        - start
        - finish
        - fail

Prior to version 1.8.0 Put the ntfy: option in the hooks: section of your configuration.

New in version 1.8.9 Instead of username/password, you can specify an ntfy access token:

ntfy:
    topic: my-unique-topic
    server: https://ntfy.my-domain.com
    access_token: tk_AgQdq7mVBoFD37zQVN29RhuMzNIz2

Loki hook

New in version 1.8.3 Grafana Loki is a "horizontally scalable, highly available, multi-tenant log aggregation system inspired by Prometheus." borgmatic has built-in integration with Loki, sending both backup status and borgmatic logs.

You can configure borgmatic to use either a self-hosted Loki instance or a Grafana Cloud account. Start by setting your Loki API push URL. Here's an example:

loki:
    url: http://localhost:3100/loki/api/v1/push

With this configuration, borgmatic sends its logs to your Loki instance as any of the prune, compact, create, or check actions are run. Then, after the actions complete, borgmatic notifies Loki of success or failure.

This hook supports sending arbitrary labels to Loki. For instance:

loki:
    url: http://localhost:3100/loki/api/v1/push

    labels:
        app: borgmatic
        hostname: example.org

There are also a few placeholders you can optionally use as label values:

These placeholders are only substituted for the whole label value, not interpolated into a larger string. For instance:

loki:
    url: http://localhost:3100/loki/api/v1/push

    labels:
        app: borgmatic
        config: __config
        hostname: __hostname

Also check out this Loki dashboard for borgmatic if you'd like to see your backup logs and statistics in one place.

Apprise hook

New in version 1.8.4 Apprise is a local notification library that "allows you to send a notification to almost all of the most popular notification services available to us today such as: Telegram, Discord, Slack, Amazon SNS, Gotify, etc."

Depending on how you installed borgmatic, it may not have come with Apprise. For instance, if you originally installed borgmatic with pipx, run the following to install Apprise so borgmatic can use it:

sudo pipx install --force borgmatic[Apprise]

Omit sudo if borgmatic is installed as a non-root user.

Once Apprise is installed, configure borgmatic to notify one or more Apprise services. For example:

apprise:
    services:
        - url: gotify://hostname/token
          label: gotify
        - url: mastodons://access_key@hostname/@user
          label: mastodon

With this configuration, borgmatic pings each of the configured Apprise services when a backup begins, ends, or errors, but only when any of the prune, compact, create, or check actions are run.

You can optionally customize the contents of the default messages sent to these services:

apprise:
    services:
        - url: gotify://hostname/token
          label: gotify
    start:
        title: Ping!
        body: Starting backup process.
    finish:
        title: Ping!
        body: Backups successfully made.
    fail:
        title: Ping!
        body: Your backups have failed.
    states:
        - start
        - finish
        - fail

New in version 1.8.9 borgmatic logs are automatically included in the body data sent to your Apprise services when a backup finishes or fails.

You can customize the verbosity of the logs that are sent with borgmatic's --monitoring-verbosity flag. The --list and --stats flags may also be of use. See borgmatic create --help for more information.

If you don't want any logs sent, you can disable this feature by setting send_logs to false:

apprise:
    services:
        - url: gotify://hostname/token
          label: gotify
    send_logs: false

Or to limit the size of logs sent to Apprise services:

apprise:
    services:
        - url: gotify://hostname/token
          label: gotify
    logs_size_limit: 500

This may be necessary for some services that reject large requests.

See the configuration reference for details.

Scripting borgmatic

To consume the output of borgmatic in other software, you can include an optional --json flag with create, rlist, rinfo, or info to get the output formatted as JSON.

Note that when you specify the --json flag, Borg's other non-JSON output is suppressed so as not to interfere with the captured JSON. Also note that JSON output only shows up at the console and not in syslog.

Latest backups

All borgmatic actions that accept an --archive flag allow you to specify an archive name of latest. This lets you get the latest archive without having to first run borgmatic rlist manually, which can be handy in automated scripts. Here's an example:

borgmatic info --archive latest

Improve this documentation

Have an idea on how to make this documentation even better? Use our issue tracker to send your feedback!